Maeda koki MK type WATER SIGNAL

MK type WATER SIGNAL

[ Flow is visible at a glance ] is a current detector to check the flow of fluid in the movement of the ball of the transparent tube (or float). 　 Flow rate can not be confirmed . [ Mounting orientation does not matter ] attitude of when mounting because it uses a spring inside the upward and downward and 　 can be done sideways, etc. freely.
　

　

Model List

Model	Dimensions (mm)			Standard flow rate (L / min)
Model	Port size	full length	Full width	minimum	maximum
MK15-1TW	Rc1 / 8	Fifty	Fifteen	0.1	One
MK25-1TW	Rc1 / 8	68	twenty five	0.6	Six
MK25-2TW	Rc1 / 4	68	twenty five	0.6	Six
MK25-3TW	Rc3 / 8	74	twenty five	0.6	Six
MK30-2TW	Rc1 / 4	Ninety	Thirty	Two	Twenty
MK30-3TW	Rc3 / 8	94	Thirty	Two	Twenty
MK30-4TW	Rc1 / 2	Hundred	Thirty	Two	Twenty

※ supplement for the model　type of case where the connection inlet outlet of R male thread will be MK25- □ TOW. Example: MK25-3TOW 　type of case connection entrance of R male thread will be MK25- □ TOMW. Example: MK25-3TOMW 　the type of case where the connection outlet of R male thread will be MK25- □ TMOW. Example: MK25-3TMOW standard specification

fluid		water
Flow rate		See above	Please contact us when you hope for more than the standard specification flow rate below -.
Connection		Rc female thread	Changes to the R male thread combination with R male thread is also available.
Heatproof temperature		Maximum 80 ℃	-
Breakdown		1MPa	-
Material	Transparent tube	acrylic	-
	Fittings	C3604 (brass)	Made of SUS are also available.
	spring	SUS304	-
	Nylon ball	Nylon 66	You may need to use a cylindrical float.
	O-ring	Nitrile rubber	-

Contact Contact Us

Maeda koki MK type WATER SIGNAL

About