MAEDA KOKI Water Signal MKTV

MKTV

MKT
MKTV

Contact Contact Us

Fax：0066(0)22742014

Tel：022742010/022742011

Email：sales@kayoshoji.com

Add：177 Soi Ratchada Niwet 1/5 Samsen Nok Huai Khwang

Home > Manufacturer > MAEDA KOKI > Water Signal > MKTV > >

MKTV type WATER SIGNAL

[ Flow rate can be seen with the naked eye ] because you are using a transparent tapered tube, with a display red line ball (or float) 　 it is possible to check the approximate flow rate by looking at the relationship between position. [ Flow rate with adjustable valve ] 　 to adjust the miniature valve, by aligning the position of the display the red line the ball 　 is possible to set the required flow rate of. [ Mounting orientation does not matter ] 　 attitude of when mounting because it uses a spring inside the upward and downward and 　 can be done sideways, etc. freely.
　

Model List

Model	Dimensions (mm)				Standard flow rate (L / min)
Model	Connection	full length	Full width	Depth	minimum	maximum
MKTV25-1TW	RC1 / 8	94	twenty five	51	One	Five
MKTV25-2TW	Rc1 / 4	94	twenty five	51	One	Five
MKTV25-3TW	Rc3 / 8	99	twenty five	51	One	Five

When ordering, quote □ Please specify the inside of.　

Model
MKTV □□ - □ TW

Regular flow rate
□ L / Min

Example: MKTV25-2TW regular flow 3L / Min ※ model in the case of the connection R male thread will be MKTV25- □ TOW. Example: MKTV25-3TOW standard specification

fluid		water
Flow rate		See above	Please contact us when you hope for more than the standard specification flow rate below -.
Connection		Rc female thread	Changes to the R male thread combination with R male thread is also available.
Heatproof temperature		Maximum 80 ℃	-
Breakdown		1MPa	-
Material	Transparent tube	acrylic	-
	Fittings	C3604 (brass)	-
	spring	SUS304	-
	Nylon ball	Nylon 66	You may need to use a cylindrical float.
	Miniature valve	BC	-
	O-ring	Nitrile rubber	-

Total 0Page0Records